DC CUSTOMS AND FABRICATION LIMITED

Suzuki Jimny (1998–2018 JB23/JB33/JB43) LED tail lights

Name: Suzuki Jimny (1998–2018 JB23/JB33/JB43) LED tail lights
Brand: DC CUSTOMS AND FABRICATION LIMITED
Price: 400.0 NZD
Availability: InStock

$400.00 NZD

Sale Sold out

Tax included.

Product variants

Quantity

Let’s be honest—the factory rear lights on the classic 3rd-gen Jimny are pretty tragic. If you're still running the original OEM halogens on your 1998–2018 rig, they’re probably faded, full of moisture after the last river crossing, or flickering their way to early retirement.

Upgrading to these premium LED tail lights isn't just about making your Jimny look sharp on the Gram - it’s a massive upgrade for safety on the road and out in the bush.

Why Ditch the Factory Lights?

Street Legal / Compliance Ready: Fully ADR compliant and WoF approved as replacement lighting units. (See the compliance note below regarding your rear reflectors!)
Instant Braking Response: LEDs light up 0.4 seconds faster than halogens, giving tailgating drivers extra stopping distance.
Massive 200m Visibility: Pumps out 1,200 lumens per side so trucks can see you through thick dust, torrential rain, or heavy fog.
Built Tough: Fully sealed IP65 weatherproof rating and shatterproof polycarbonate lenses stop water, mud, and stray branches from ruining your lights.
NO more Blown bulbs: High-intensity SMD LEDs last over 50,000 hours and draw just 5W of power compared to the power-hungry 21W OEM setup.

⚠️ Important AU/NZ Compliance Note to pass a legal WoF in New Zealand or a Roadworthy inspection in Australia, your vehicle must feature a pair of rearward-facing red reflectors. Suzuki put the factory reflectors inside the lower bumper lights on the 3rd-gen Jimny (not the tail lights), you must ensure your Suzuki retains its stock bumper lights or after market reflectors. (This rule applies for all tail lights even your factory ones)

If you have a factory rear bumper: You are 100% good to go. These tail lights will work perfectly alongside your factory bumper reflectors.
If you have an aftermarket steel bumper: Ensure your aftermarket bar has built-in reflectors, or use a pair of stick-on aftermarket red reflectors onto the rear of your vehicle to stay 100% legal. ( We sell reflector options )

True Plug-and-Play Installation

Skip the expensive auto-electrician fees. This kit is a direct, bolt-in swap for all JB23, JB33, and JB43 models—no wire hacking required.

Unbolt: Undo the factory hardware and pop the old, crusty housings out.
Plug In: Connect the new unit straight into your factory wiring harness.
Secure: Bolt the new housings in, reconnect your battery, and you are good to go.

Pro Tip: Slap a bit of dielectric grease onto the plug pins before connecting. It stops moisture buildup and salt corrosion if you love beach driving or deep river crossings.

What’s in the Box?